Join us :
 
 
 
 
  Digital Printing Solution
 

VETRO SOL DIGI COATS IS pri coat and post coat solution for digital printing on glass, plywood, ceramic tile, MDF ,acrylic, fiber, aluminum, metal or any surface VETRO SOL DIGI COAT is sprayble liquid clear coating for coating on printed surface. Also VETRO SOL DIGI COATS comes in opaque white finish to hide surface or to use on glass after printing process is done.

How to apply on glass surface:-
In that case you have to first use VETRO SOL DIGI COATS pri coat that is clear coat. First you clean the surface of glass. Then apply VETRO SOL DIGI COATS clear coat on glass by spray or by brush. After 15 to 30 minutes you can print on that glass. And finally after finish the printing you can use VETRO SOL DIGI COATS white paint as a post coat or final coat. It takes 12 to 15 hours for drying by air drying process. And if you have heating system it will dry fast by heating this coated glass. This will give you permanent image on glass. It will protect you image from damaging. You can cut or pest glass any where using natural silicone.

How to apply on other surface:-
In that case you have to first use VETRO SOL DIGI COATS white paint as a pri coat by spray.
It take 15 to 30 minutes to dry. After drying you can print on surface. After finish the print job you can use VETRO SOL DIGI COATS clear coat as a post coat to protect print. VETRO SOL DIGI COATS clear coat is high gloss clear coat so it will protect print as well as it gives gloss and shine to printed surface.

VETRO SOL DIGI COATS is none yellowing, single component specially formulated for to save printing So there will be no problem of adhesion on glass. VETRO SOL DIGI COATS is lid free tin free paint so will not harm workers while spraying it. For fast drying you just give 120 degree temperature for 20 minutes and it become hard enough for long time adhesion. Or else it is air drying paint.


Advantages:-

  • VETRO SOL DIGI COATS meet the requirement of RoHS and REACH.
  • VETRO SOL DIGI COATS is none yellowing (not fade in sunlight).
  • VETRO SOL DIGI COATS is lid free and tin free.
  • VETRO SOL DIGI COATS are Safe and easy to use.
  • VETRO SOL DIGI COATS are Durable
  • VETRO SOL DIGI COATS are Suitable for Small and large application.
 
 
   
Coating for Digital Printing
 

VETRO SOL DIGI COATS IS pri coat and post coat solution for digital printing on glass, plywood, ceramic tile, MDF ,acrylic, fiber, aluminum, metal or any surface VETRO SOL DIGI COAT is sprayble liquid clear coating for coating on printed surface. Also VETRO SOL DIGI COATS comes in opaque white finish to hide surface or to use on glass after printing process is done.

How to apply on glass surface:-
In that case you have to first use VETRO SOL DIGI COATS pri coat that is clear coat. First you clean the surface of glass. Then apply VETRO SOL DIGI COATS clear coat on glass by spray or by brush. After 15 to 30 minutes you can print on that glass. And finally after finish the printing you can use VETRO SOL DIGI COATS white paint as a post coat or final coat. It takes 12 to 15 hours for drying by air drying process. And if you have heating system it will dry fast by heating this coated glass. This will give you permanent image on glass. It will protect you image from damaging. You can cut or pest glass any where using natural silicone.

How to apply on other surface:-
In that case you have to first use VETRO SOL DIGI COATS white paint as a pri coat by spray.
It take 15 to 30 minutes to dry. After drying you can print on surface. After finish the print job you can use VETRO SOL DIGI COATS clear coat as a post coat to protect print. VETRO SOL DIGI COATS clear coat is high gloss clear coat so it will protect print as well as it gives gloss and shine to printed surface.

VETRO SOL DIGI COATS is none yellowing, single component specially formulated for to save printing So there will be no problem of adhesion on glass. VETRO SOL DIGI COATS is lid free tin free paint so will not harm workers while spraying it. For fast drying you just give 120 degree temperature for 20 minutes and it become hard enough for long time adhesion. Or else it is air drying paint.


Advantages:-

  • VETRO SOL DIGI COATS meet the requirement of RoHS and REACH.
  • VETRO SOL DIGI COATS is none yellowing (not fade in sunlight).
  • VETRO SOL DIGI COATS is lid free and tin free.
  • VETRO SOL DIGI COATS are Safe and easy to use.
  • VETRO SOL DIGI COATS are Durable
  • VETRO SOL DIGI COATS are Suitable for Small and large application.
  • VETRO SOL DIGI COATS looks great.
  • Only 120 degree Celsius temperature for 20 minutes to cure this paint. And VETRO SOL DIGI COATS becomes hard enough to long life. Or else this is air drying COATING.
   
 
   
Pri Coat for Digital Printing
 

VETRO SOL DIGI COATS IS pri coat and post coat solution for digital printing on glass, plywood, ceramic tile, MDF ,acrylic, fiber, aluminum, metal or any surface VETRO SOL DIGI COAT is sprayble liquid clear coating for coating on printed surface. Also VETRO SOL DIGI COATS comes in opaque white finish to hide surface or to use on glass after printing process is done.

How to apply on glass surface:-
In that case you have to first use VETRO SOL DIGI COATS pri coat that is clear coat. First you clean the surface of glass. Then apply VETRO SOL DIGI COATS clear coat on glass by spray or by brush. After 15 to 30 minutes you can print on that glass. And finally after finish the printing you can use VETRO SOL DIGI COATS white paint as a post coat or final coat. It takes 12 to 15 hours for drying by air drying process. And if you have heating system it will dry fast by heating this coated glass. This will give you permanent image on glass. It will protect you image from damaging. You can cut or pest glass any where using natural silicone.

How to apply on other surface:-
In that case you have to first use VETRO SOL DIGI COATS white paint as a pri coat by spray.
It take 15 to 30 minutes to dry. After drying you can print on surface. After finish the print job you can use VETRO SOL DIGI COATS clear coat as a post coat to protect print. VETRO SOL DIGI COATS clear coat is high gloss clear coat so it will protect print as well as it gives gloss and shine to printed surface.

VETRO SOL DIGI COATS is none yellowing, single component specially formulated for to save printing So there will be no problem of adhesion on glass. VETRO SOL DIGI COATS is lid free tin free paint so will not harm workers while spraying it. For fast drying you just give 120 degree temperature for 20 minutes and it become hard enough for long time adhesion. Or else it is air drying paint.


Advantages:-

  • VETRO SOL DIGI COATS meet the requirement of RoHS and REACH.
  • VETRO SOL DIGI COATS is none yellowing (not fade in sunlight).
  • VETRO SOL DIGI COATS is lid free and tin free.
  • VETRO SOL DIGI COATS are Safe and easy to use.
  • VETRO SOL DIGI COATS are Durable
  • VETRO SOL DIGI COATS are Suitable for Small and large application.
  • VETRO SOL DIGI COATS looks great.
  • Only 120 degree Celsius temperature for 20 minutes to cure this paint. And VETRO SOL DIGI COATS becomes hard enough to long life. Or else this is air drying COATING.
   
 
   
Post Coat for Digital Printing
 

VETRO SOL DIGI COATS IS pri coat and post coat solution for digital printing on glass, plywood, ceramic tile, MDF ,acrylic, fiber, aluminum, metal or any surface VETRO SOL DIGI COAT is sprayble liquid clear coating for coating on printed surface. Also VETRO SOL DIGI COATS comes in opaque white finish to hide surface or to use on glass after printing process is done.

How to apply on glass surface:-
In that case you have to first use VETRO SOL DIGI COATS pri coat that is clear coat. First you clean the surface of glass. Then apply VETRO SOL DIGI COATS clear coat on glass by spray or by brush. After 15 to 30 minutes you can print on that glass. And finally after finish the printing you can use VETRO SOL DIGI COATS white paint as a post coat or final coat. It takes 12 to 15 hours for drying by air drying process. And if you have heating system it will dry fast by heating this coated glass. This will give you permanent image on glass. It will protect you image from damaging. You can cut or pest glass any where using natural silicone.

How to apply on other surface:-
In that case you have to first use VETRO SOL DIGI COATS white paint as a pri coat by spray.
It take 15 to 30 minutes to dry. After drying you can print on surface. After finish the print job you can use VETRO SOL DIGI COATS clear coat as a post coat to protect print. VETRO SOL DIGI COATS clear coat is high gloss clear coat so it will protect print as well as it gives gloss and shine to printed surface.

VETRO SOL DIGI COATS is none yellowing, single component specially formulated for to save printing So there will be no problem of adhesion on glass. VETRO SOL DIGI COATS is lid free tin free paint so will not harm workers while spraying it. For fast drying you just give 120 degree temperature for 20 minutes and it become hard enough for long time adhesion. Or else it is air drying paint.


Advantages:-

  • VETRO SOL DIGI COATS meet the requirement of RoHS and REACH.
  • VETRO SOL DIGI COATS is none yellowing (not fade in sunlight).
  • VETRO SOL DIGI COATS is lid free and tin free.
  • VETRO SOL DIGI COATS are Safe and easy to use.
  • VETRO SOL DIGI COATS are Durable
  • VETRO SOL DIGI COATS are Suitable for Small and large application.
  • VETRO SOL DIGI COATS looks great.
  • Only 120 degree Celsius temperature for 20 minutes to cure this paint. And VETRO SOL DIGI COATS becomes hard enough to long life. Or else this is air drying COATING.
   
 
 
 
 

Home   l   About us   l   Our Products   l   Product Uses    l   How to Apply    l   Downloads   l   Enquiry   l   Contact us

Copyright © VETROSOL all rights reserved.
site designed & developed by Colour Infomedia
ɳ888վ